Introduction; Check Led Indicators - Thermo Scientific iCAP 6000 Series Maintenance Manual

iCAP Customer Training Manual
1

Introduction

The iCAP 6000 is designed to be constantly powered up and the optical system
continuously purged.
The instrument is powered via an on/off switch at the rear of the left side.
Figure 1 – iCAP 6000 Power On/Off
1.1

Check Led indicators

On the rear right hand side of instrument there are row of Led's which indicate, when
power on and the status of the instrument.
Once the chiller has been turned on and reached it set temperature led's 1-7 should be
on and led 8 should be flashing
Led 9 is for engineer fast purge for gas to optical tank and should only be on if fast purge
is required and turned off when analysing samples.