Figure 12. Read Options: Measurement Configuration; Figure 13. Changing, Renaming Or Deleting A Sample - HunterLab EasyMatch User Manual

▪
Now your instrument is ready to read your product under this new workspace. If
you'd like to start a new job for this product, you can press New Job and load this
configured workspace to continue.
•
Main Measurement Screen: The Color Data Table view shows the configured Color Scale
results for the standard and sample measurements in the job. The configured tolerances
can be applied to the Job and Pass/Fail results will also be displayed. To add the color
differences, indices and tolerances to the Color Data Screen, see Workspace > Color Scales
and Workspace > Standard and Tolerances.
•
To add a product standard and tolerances, see Standards and Tolerances. To change the
color scale, etc., see Workspace: Color Scales. The setups are saved automatically in
Workspace.
•
A long press on the Sample name will show a menu with the following options:
▪
Set as Standard – to set the sample as Standard
▪
Rename – to rename the sample
▪
Delete – to delete the sample.
User's Manual for Aeros and EasyMatch Essentials v 1.1

Figure 12. Read Options: Measurement Configuration

Figure 13. Changing, Renaming or Deleting a Sample

15