Figure 11. Name New Workspace - HunterLab EasyMatch User Manual

Note: The active workspace name is displayed in the lower right corner of the screen.
▪
Configure the New Workspace: With this new workspace open, you can start to
change the settings in Color Scales, Read Options, Standard and Tolerances, Views
and View Options. All these changes will be automatically saved in this new
workspace.
▪
Default Settings: Following are the default settings for a new workspace:
Parameter
ColorScales
Illuminant
Indices
Differences
Read Options > Options
Read Options > Measurement
Configuration
Standard and Tolerances
Views
View Options for Color Data Table
▪
When Auto Height is selected as default, the sensor head will adjust its position
automatically for each sample measurement. Users can also choose to read
samples with the sensor head at a fixed distance. Create Sample Profile is covered
in Workspace > Read Options > Measurement Configuration portion of this
manual.
14
User's Manual for Aeros and EasyMatch Essentials v 1.1

Figure 11. Name New Workspace

Table 1. Workspace Parameters
Selection
CIE L*a*b*
D65/10
None
None
Prompt for Sample Name, Auto Save
Turntable ON, Auto Height selected,
Measurement time = 5 sec
None
Color Data Table only
Latest Data First selected, Precision = 2