Taking A Simple Measurement; What Is Hunterlab Aeros & Easymatch Essentials; Connecting The Sensor And Taking A Measurement; Figure 4. Measurement Screen - HunterLab EasyMatch User Manual

What is HunterLab Aeros & EasyMatch Essentials?
Aeros is a reflectance-only color measuring instrument capable of measuring the color of irregularly
shaped/textured products. All samples are measured by placement in a tray or container under the
sensor head. With features like Auto Height Positioning, a rotating sample platform, large touch-screen
display, and smart communications, the innovative Aeros can measure products like coffee beans, snack
foods, plastic pellets, even industrial minerals.

Connecting the Sensor and Taking a Measurement

After unpacking and setting up the instrument, turn on the power using the rocker switch on the back of
the instrument base.
•
Once inside the software, the main measurement screen is displayed – Color Data Table
(D65/10).
•
The instrument is automatically connected and this connection is reported on the status bar.
Next, the unit must be Standardized.
•
There are two ways to initiate Standardization.
▪
Press the Workspace icon
to remove all samples from under the sensor.
▪
Alternately, press the Standardization status area on the status bar to initiate
Standardization.
•
Move sensor to Top: Press OK to move the sensor to the highest position.
User's Manual for Aeros and EasyMatch Essentials v 1.1

Taking a Simple Measurement

Figure 4. Measurement Screen

and select Standardization. User will be prompted
11