Figure 115. Configure Ethernet; Figure 116. Select Dchp; Figure 117. Auto Export Measurement - HunterLab EasyMatch User Manual

•
Select Configure Ethernet Settings.
•
Check Use DHCP for Ethernet Config. Please write down the IP address showing in
the Ethernet Setting dialog. You can also check the IP address of Aeros in Jobs >
About > Info.
•
Go to Workspace > Preferences and select Auto Network Data Export
Measurement using a check and select Config. Choose Aeros as Server and Port
number as 11111. You can also choose a delimiter to mark your data.
68
User's Manual for Aeros and EasyMatch Essentials v 1.1

Figure 115. Configure Ethernet

Figure 116. Select DCHP

Figure 117. Auto Export Measurement