Figure 86. System Settings> Preferences> General Page; Figure 87. Enable Novice Tool Tips; Figure 88. Example Of Novice Tool Tip - HunterLab EasyMatch User Manual

User's Manual for Aeros and EasyMatch Essentials v 1.1
Figure 86. System Settings> Preferences> General Page
▪
To Load the Last Workspace at Startup check this box and press Apply.
▪
To Load the Last Job at Startup, check this box and press Apply.
▪
The Standardization Time Interval is a useful reminder to restandardize. Press
Apply to set the new interval. When the time has lapsed, a prompt to restandardize
will be displayed before measurements can be taken.
▪
Set the screen Brightness using a sliding scale and press Apply.
▪
Set the Date and Time, time zone, and format use the Adjust Clock feature.
▪
Enable Novice Tooltips by checking on the box. Once enabled, on screen tips are
displayed for 3 seconds. To display again, roll over the lightbulb icon on the lower
right part of the screen.

Figure 88. Example of Novice Tool Tip

Figure 87. Enable Novice Tool Tips

53