Operation; General Fire Alarm Procedure - Siemens FC121-ZA Technical Manual

6
6.1
Smart Infrastructure

Operation

General fire alarm procedure

In case of a fire alarm, the following indication is shown on the panel:
·
The fire alarm is indicated by the LEDs (1).
·
The first and last alarm zone are displayed (8).
·
Further fire alarms are indicated by the flashing LED (2). In order to move to the
next alarm event, press the button (4).
·
The internal panel buzzer indicates a fire condition acoustically. As an option,
the buzzer can be silenced by pressing the button (7). A new alarm event will
reactivate the buzzer again.
·
Output alarm dialer is activated when LED (3) is ON. (Call the fire brigade.)
·
Programmed system outputs, including connected audible and visual
notification appliances, get activated.
·
The flashing acknowledge LED (5) indicates the possible action to acknowledge
by pressing the button (6).
41
A6V10393190_h_en_--
2019-09-01