Change Passcode; Schedules - Bosch IUI-MAP0001 User Manual

MAP Control Center
Edit Control Center User
From the Edit User - User ID screen (Figure 2.36, Page 28), press Edit Control Center User.
The Edit Control Center User screen (Figure 2.38, Page 29) opens. Refer to Section Add
Control Center User, page 22 for instructions on adding or editing information about the
control center user.
Figure 2.38 Edit Control Center User screen
2.5.4

Change Passcode

To change a logged-in user's passcode, press Change Passcode. The Change Passcode
screen (Figure 2.39, Page 29) opens. Using the on-screen numeric keypad, enter the new
passcode in the Enter New Passcode field, then verify the new passcode by entering it again
in the Verify New Passcode field.
Figure 2.39 Change Passcode screen
2.6

Schedules

The Schedules screen allows the user to view or edit a programmed schedule. On the Main
Menu (Figure 1.5, Page 8), press Schedules. The Schedules screen (Figure 2.40, Page 30)
opens with a list of the schedules programmed into the system.
Bosch Security Systems, Inc. User guide
Operation | en 29
F.01U.168.328 | 03 | 2011.05