Exit Delay Tone And Display; Keystroke Checking Tones; Silencing An Alarm; How Your System Reports Alarms - Bosch Security Systems User Manual

Bosch security systems
Hide thumbs Also See for Security Systems:
Table of Contents

Advertisement

Exit Delay Tone and Display

Exit Delay Tone and Display
Exit Delay Tone and Display
Exit Delay Tone and Display
Exit Delay Tone and Display
After the system is armed, the command center emits
a repeating beep tone, displays EXIT NOW
down the exit delay time.

Keystroke Checking Tones

Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Keystroke Checking Tones
Valid Entry
Valid Entry
Valid Entry
Valid Entry
Valid Entry
The command center sounds a muted beep tone when
an appropriate key for the function or entry desired is
pressed, indicating the keystroke was accepted.
Invalid Entry
Invalid Entry
Invalid Entry
Invalid Entry
Invalid Entry
A flat buzz tone sounds when you press a key that
doesn't have a function to execute or when the keypad
has no information to display.

Silencing an Alarm

Silencing an Alarm
Silencing an Alarm
Silencing an Alarm
Silencing an Alarm
The audible alarm sounds for a specific period of time
before it automatically shuts off. To silence the siren
before the time expires, simply enter your personal
ENT
ENT
passcode and press ENT
ENT
ENT.
EXIT NOW
EXIT NOW, and counts
EXIT NOW
EXIT NOW
To SILENCE an alarm:
To SILENCE an alarm:
To SILENCE an alarm:
To SILENCE an alarm:
To SILENCE an alarm:
Enter your passcode and press ENT
Ho
Ho
Ho
How t
Ho
w t
w t
w t
w the Sy
he Sy
he Sy
he Sys s s s s t t t t t em R
he Sy
The security system can be programmed to
automatically disconnect the telephones when sending
reports to the security company. Once the report is
completed, the security system returns the telephones
to normal operation (check with your security
company).
The system makes repeated attempts to send reports
to the security company. In the event the security
system fails to communicate, the command center
buzzes and the keypad displays SERVC COMM FAIL
Notify your security company of the communications
failure.
Note:
Note:
Note:
Note:
Note: If the telephone service is interrupted, the
security system cannot send reports to the
security company unless an alternate means
of transmitting the reports exists.
ENT
ENT
ENT
ENT.
em R
em Repor
em R
em R
eport t t t t s Alar
epor
epor
epor
s Alarms
s Alar
s Alar
s Alar
SERVC COMM FAIL
SERVC COMM FAIL
SERVC COMM FAIL.
SERVC COMM FAIL
ms
ms
ms
ms
21

Advertisement

Table of Contents
loading

Table of Contents