Error Alert Mode - Cisco 7010 Installation Manual

Chapter 6 Using the LCD Panel on a Firepower Device
Table 6-3
Option
Serial number
Versions
To enter Information mode and view identifying system information:
Step 1 In Idle Display mode, press any multi-function key to enter the main menu.
The main menu appears:
Network Config
System Status
Step 2 Scroll through the modes by pressing the down arrow (â) key until the LCD panel displays Information
mode:
System Status
Information
Step 3 Press the right arrow ( ) key on the bottom row to access Information mode.
Step 4 Scroll through the options by pressing the down arrow (â) key. Press the right arrow key in the row next
to the information you want to view.
Depending on the option you chose, the LCD panel displays the information listed in
page
Do we need a step here talking about how to get back?

Error Alert Mode

When a hardware error or fault condition occurs, Error Alert mode interrupts Idle Display mode. In Error
Alert mode, the LCD display flashes and displays one or more of the errors listed in the following table.
Table 6-4
Error
Hardware alarm
Link state propagation
Bypass
Fan status
Information Mode Options (continued)
Description
Displays the device's chassis serial number.
Displays the device's system software and firmware versions. Use the
multi-function keys to scroll through the following information:
Product version
•
NFE version
•
Micro Engine version
•
Flash version
•
GerChr version
•
6-8.
LCD Panel Error Alerts
Description
Alerts on hardware alarms
Displays the link state of paired interfaces
Displays the status of inline sets configured in bypass mode
Alerts when a fan reaches a critical condition
Firepower 7000 and 8000 Series Installation Guide
Error Alert Mode
Table 6-3 on
6-9