Firepower 8000 Series Chassis Front View - Cisco 7010 Installation Manual

Firepower 8000 Series Devices
•
The AMP models have many of the same form factors as their Firepower counterparts, but have been
Note
optimized to take advantage of the Firepower System's network-based advanced malware protection
(AMP) capabilities.
See the following sections for more information:
•
•
•
•

Firepower 8000 Series Chassis Front View

The Firepower 8000 Series chassis can be in the AMP8x50, 81xx Family, the 82xx Family, or the 83xx
Family. See the Regulatory Compliance and Safety Information for FirePOWER and FireSIGHT
Appliances document for safety considerations for AMP8x50, 81xx Family, 82xx Family, and 83xx
Family appliances.
AMP8x50 and Firepower 81xx Family Chassis Front View
The front view of the chassis contains the LCD panel, front panel, and three module slots.
Figure 7-16
Firepower 82xx Family and Firepower and AMP 83xx Family Chassis Front View
The front view of the chassis contains the LCD panel, front panel, and seven module slots.
Firepower 7000 and 8000 Series Installation Guide
7-22
Firepower 8390 and AMP8390, part of the 83xx Family, is an 8U configuration with four 2U
chassis. The primary chassis contains three stacking modules and up to four sensing modules. Each
secondary chassis contains one stacking module. This model is fully configured and does not accept
a stacking kit.
Firepower 8000 Series Chassis Front View, page 7-22
Firepower 8000 Series Chassis Rear View, page 7-26
Firepower 8000 Series Physical and Environmental Parameters, page 7-29
Firepower 8000 Series Modules, page 7-32
AMP8x50 and Firepower 81xx Family (Chassis: CHAS-1U-AC/DC) Front View
Chapter 7 Hardware Specifications