Inserting And Removing Firepower 8000 Series Modules; Module Slots On The Firepower 8000 Series Devices; Firepower 81Xx Family - Cisco 7010 Installation Manual

Inserting and Removing Firepower 8000 Series
Modules
Firepower 8000 Series devices allow for modular flexibility in your deployment. Use the steps in this
section to:
•
•

Module Slots on the Firepower 8000 Series Devices

Firepower 8000 Series devices can use the modules in the following slots:
•
•
After you insert the modules into your device, see the following sections for more information on using
the modules:
•
•

Firepower 81xx Family

Firepower 81xx Family devices can use the modules in the following slots:
Figure C-1
insert a new module
remove or replace a preinstalled module
Firepower 81xx Family, page C-1
Firepower 82xx Family and 83xx Family, page C-2
For information on configuring the sensing interfaces, see
page 4-3.
For information on using the stacking module, see
page 4-13.
Firepower 81xx Family Primary Device
A P P E N D I X
Identifying the Sensing Interfaces,
Using Devices in a Stacked Configuration,
Firepower 7000 and 8000 Series Installation Guide
C
C-1