Cisco 7010 Installation Manual page 120

Firepower 7000 Series Devices
Firepower 7115, 7125, and AMP7150 Chassis Front View
The front of the chassis contains the LCD panel, USB port, front panel, copper sensing interfaces, and
SFP sockets.
Figure 7-11
The following table describes the features on the front of the appliance.
Table 7-22
Feature
LCD panel
Front panel USB 2.0
port
Front panel
Sensing interfaces
Figure 7-12
Table 7-23
A
B
C
D
The front panel of the chassis houses LEDs, which display the system's operating state. The following
table describes the LEDs on the front panel.
Firepower 7000 and 8000 Series Installation Guide
7-14
Firepower 7115, 7125, and AMP7150 (Chassis: GERY-1U-8-4C8S-AC) Front View
Firepower 7115, 7125, and AMP7150 System Components: Front View
Description
Operates in multiple modes to configure the device, display error messages,
and view system status. For more information, see
a Firepower Device, page
Allows you to attach a keyboard to the device.
Houses LEDs that display the system's operating state, as well as various
controls, such as the power button. For more information, see
Figure 7-12Firepower 7115, 7125, and AMP7150 Front Panel, page
Contain the sensing interfaces that connect to the network. For more
information, see
page 7-16.
Firepower 7115, 7125, and AMP7150 Front Panel
Firepower 7115, 7125, and AMP7150 Front Panel Components
USB 2.0 connector
Reset button
NIC2 activity LED
System status LED
6-1.
Firepower 7115, 7125, and AMP7150 Sensing Interfaces,
E NIC1 activity LED
F Hard drive activity LED
G ID button
H Power button and LED
Chapter 7 Hardware Specifications
Using the LCD Panel on
7-14.