Cisco 7010 Installation Manual page 104

Error Alert Mode
When a hardware error alert occurs, the LCD displays the main hardware alert menu, as follows:
HARDWARE ERROR!
Exit
You can use the multi-function keys to scroll through the list of error alerts or exit Error Alert mode.
Note that the LCD display continues to flash and display an alert message until all error conditions are
resolved.
The LCD panel always displays the platform daemon error message first, followed by a list of other
hardware error messages. The following table provides basic information on Firepower device error
messages, where
Table 6-5 Hardware Alarm Error Messages
Error Message
NFE_platformd
X
NFE_tempX
HeartBeatX
fragX
rulesX
TCAMX
NFEMessDX
NFEHardware
NFEcount
7000 Series only:
GerChr_comm
8000 Series only:
NMSB_comm
7000 Series only:
gerd
8000 Series only:
scmd
7000 Series only:
gpsl
8000 Series only:
psls
Firepower 7000 and 8000 Series Installation Guide
6-10
indicates the NFE accelerator card (
X
Condition Monitored
platform daemon
temperature status
heartbeat
(host frag)
nfe_ipfragd
daemon
(host rules) daemon Alerts when the
Rulesd
TCAM daemon
message daemon
hardware status
cards detected
communications
daemon status
scmd
daemon status
psls
Chapter 6
or
0 1
Description
Alerts when the platform daemon fails.
Alerts when the temperature of the accelerator card exceeds
acceptable limits:
: greater than 80°C/176°F (7000 Series) or 97°C/206°F
•
WARNING
(8000 Series).
: greater than 90°C/194°F (7000 Series) or
•
CRITICAL
102°C/215°F (8000 Series).
Alerts when the system cannot detect the heartbeat.
Alerts when the daemon fails.
ipfragd
daemon fails.
Rulesd
Alerts when the daemon fails.
TCAM
Alerts when the message daemon fails.
Alerts when one or more accelerator cards is not communicating.
Alerts when the number of accelerator cards detected on the device
does not match the expected accelerator card count for the platform.
Alerts when the media assembly is not present or not
communicating.
Alerts when the
scmd daemon
Alerts when the
psls daemon
Using the LCD Panel on a Firepower Device
) that generated the alert.
fails.
fails.