Download Print this page

Advertisement

Cisco Video Surveillance 7030 IP Camera
Installation Guide
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-28692-01

Advertisement

   Also See for Cisco 7030

   Related Manuals for Cisco 7030

   Summary of Contents for Cisco 7030

  • Page 1

    Cisco Video Surveillance 7030 IP Camera Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28692-01...

  • Page 2

    OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    IP Camera Window Links IP Camera Windows Adjusting the IP Camera Focus and Zoom Powering the IP Camera On or Off Resetting the IP Camera Viewing Live Video N D E X Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 4

    Contents Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 5

    Obtaining Documentation, Obtaining Support, and Security Guidelines For information about obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed...

  • Page 6

    Preface Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 7: Introduction

    C H A P T E R Overview This chapter describes the Cisco Video Surveillance 7030 IP Camera, and includes the following topics: Introduction, page 1-1 • Package Contents, page 1-2 • • IP Camera Physical Details, page 1-3 Introduction The Cisco Video Surveillance 7030 IP camera is an outdoor, high definition, professional fixed dome IP camera with industry-leading image quality and processing power.

  • Page 8

    Chapter 1 Overview Package Contents Package Contents The Cisco Video Surveillance IP Camera package includes the following items: Cisco Video Surveillance 7030 IP Camera (1) • Installation template and alignment sticker (1) • Mounting plate (1) • Black cover (1) •...

  • Page 9: Cisco Video Surveillance 7030 Ip

    Overview IP Camera Physical Details IP Camera Physical Details Figure 1-1 and the table that follows describe the physical features of the 7030 IP camera. Figure 1-1 IP Camera Physical Features Varifocal lens IP camera lens that changes focus as the focal length changes.

  • Page 10

    Accepts a standard LAN cable to connect the IP camera to a 10/100BaseT router or switch. 12 GPIO Block General purpose input/output (GPIO) terminal block that is used to connect external input and output devices. For more information, see Figure 1-2. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 11: General Purpose I/o Terminal Block

    GPIO terminal block pin locations and descriptions. Figure 1-2 GPIO Terminal Block Pin Locations and Descriptions Description 24 VAC 24 VAC DI3+ DI2+ DI1+ The maximum output load from pins 7 and 8 is 50mA. Note Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 12

    Chapter 1 Overview General Purpose I/O Terminal Block Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 13: Camera Installation

    C H A P T E R Camera Installation This chapter provides information and instructions for installing the Cisco Video Surveillance 7030 IP Camera, and includes the following topics: Installation Guidelines, page 2-1 • Warnings Before Installation, page 2-1 •...

  • Page 14

    Do not place the IP Camera in high sunlight. humidity environments. Do not place the IP Camera on unsteady Do not touch the IP Camera during a • • surfaces. lightning storm. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 15: Chapter 2 Camera Installation

    This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353 Inline power circuits provide current through the communication cable. Use the Cisco provided cable or Caution a minimum 24AWG communication cable.

  • Page 16: Wall

    Use a screwdriver to remove the cutout on the side of the conduit base, connect a cable conduit, and • feed the cables through the side of the conduit base. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 17

    Use an RJ45 crimping tool to attach the Ethernet wires to a connector. When done, connect the cable to the camera’s Ethernet RJ45 socket. o: white/orange stripe O: orange solid g: white/green stripe B: blue solid b: white/blue stripe G: green solid br: white/brown stripe BR: brown solid Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 18: Installing The Ip Camera With A Vandal Resistant Enclosure

    Disassemble the components of the waterproof connector into parts (A) ~ (F). Sealing Nut (A) Housing (B) Seals (C) Seal (D) Screw Nut (E) Hex Nut (F) Place the screw nut (E) on the power and I/O cable opening. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 19

    Secure the sealing nut (A) tightly and hex nut (F) from the bottom of the camera. Connect the power and I/O cables to the GPIO terminal block Description 24 VAC 24 VAC DI3+ DI2+ DI1+ Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 20

    • The secondary video stream must is enabled. • We recommend that you disable analog video after installation. To disable analog video, see the Cisco Note Video Surveillance 7000 Series IP Camera Configuration Guide. While viewing video from the IP camera, perform the following steps to adjust the 3-axis field of view: Step 9 Grip the two tilt adjustment screws and pan the IP camera left or right.

  • Page 21: Silica

    After you install the IP camera, follow the instructions in the “Performing the Initial Setup of the IP • Camera” section on page 3-1 to access the IP camera through your network. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 22

    After completing the initial setup, use the IP camera user interface to adjust the focal length and • zoom factor. For more information, see the “Adjusting the IP Camera Focus and Zoom” section on page 4-3. Cisco Video Surveillance 7030 IP Camera Installation Guide 2-10 OL-28692-01...

  • Page 23

    To connect to the IP camera for the first time and make initial configuration settings, perform the following steps. You can change these configuration settings in the future as described in the Cisco Video Surveillance 7000 Series IP Camera Configuration Guide.

  • Page 24: Chapter 3 Performing The Initial Setup Of The Ip Camera

    If you are prompted to install ActiveX controls, which are required to view video from the IP camera, Step 8 follow the on-screen prompts to do so. The Home window appears. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 25: Understanding The Ip Camera User Interface

    C H A P T E R Camera Management This chapter provides information and instructions for managing the Cisco Video Surveillance 2620 IP Camera, and includes the following topics: Understanding the IP Camera User Interface, page 4-1 • Adjusting the IP Camera Focus and Zoom, page 4-3 •...

  • Page 26: Chapter 4 Camera Management

    Method by which the IP camera obtains its IP address. LAN IP IP address of the LAN to which the IP camera is connected. Subnet Mask Subnet mask of the LAN to which the IP camera is connected. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 27: Adjusting The Ip Camera Focus And Zoom

    While watching the video pane, perform the following steps: Move the Zoom slider until you achieve the desired zoom level. Move the Focus slider until the video image is at its sharpest. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 28: Powering The Ip Camera On Or Off

    There are various reset types, as described in Table 4-3. You also can also perform these reset operations from the Maintenance Settings window as described in the Cisco Video Surveillance 7000 Series IP Camera Configuration Guide. Table 4-3 Resetting the IP Camera Reset Type...

  • Page 29: Viewing Live Video

    Viewing Live Video Viewing Live Video After you install and set up the Cisco Video Surveillance IP Camera, you can connect to the IP camera through Internet Explorer and access the Camera Video & Control window to view live video.

  • Page 30

    Flip button Rotates the video image by 180 degrees. Mirror button Reverses the video image. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 31

    50, click Restore. These configuration settings affect the cell that you select. If the cell is part of a group of horizontally or vertically (but not diagonally) adjacent cells, the settings affect all cells in the group. Cisco Video Surveillance 7030 IP Camera Installation Guide OL-28692-01...

  • Page 32

    Save Settings button Save the current motion detection configuration. Focus/Zoom The Focus/Zoom feature is available only on the Cisco Video Surveillance 6020, 6030, and Note 6400 IP cameras. Up Arrow toggle Click the Up Arrow to display the focus/zoom controls. The button changes to button the Down Arrow button.

  • Page 33

    DHCP, obtaining IP address through connecting to for the first time installation GPIO terminal block mounting to ceiling or wall factory reset warnings focus/zoom waterproof connector accessing controls logging out of controls panning Cisco Video Surveillance 7030 IP Camera Installation Guide IN-1 OL-28692-01...

  • Page 34

    IP camera controls in Camera Video/Control window powering on the IP camera video resolution Power over Ethernet (PoE) controls in Camera Video/Control window Power over Ethernet (PoE) View Video link Cisco Video Surveillance 7030 IP Camera Installation Guide IN-2 OL-28692-01...

  • Page 35

    Index warnings before installation waterproof connector zoom accessing controls zoom controls Cisco Video Surveillance 7030 IP Camera Installation Guide IN-3 OL-28692-01...

  • Page 36

    Index Cisco Video Surveillance 7030 IP Camera Installation Guide IN-4 OL-28692-01...

Comments to this Manuals

Symbols: 0
Latest comments: