Before You Begin - Cisco 7010 Installation Manual

Before You Begin

Figure C-4
Figure C-5
Before You Begin
Prepare to insert or remove your module using the following guidelines:
•
•
You can insert the NetMod into any available, compatible slot.
Tip
•
•
•
•
•
•
•
•
Firepower 7000 and 8000 Series Installation Guide
C-4
Sample Module or Slot Cover (open)
Sample Module Lever (closed with screw in hole)
Identify all appliance and module parts.
Identify the slots where you want to install your NetMods.
Identify the correct slots for your stacking modules. See
page 4-13.
Firepower 8140: slot 3
Firepower 8250, 8260 and 8350, 8360 primary slot: slot 5
Firepower 8270 and 8370 primary slots: slots 5 and 1
Firepower 8290 and 8390 primary slots: slots 5, 1, and 4
Firepower 82xx and 83xx secondary: slot S
Confirm that the EMI gaskets are in place.
Unplug all power cords from the appliance.
Appendix C Inserting and Removing Firepower 8000 Series Modules
Using Devices in a Stacked Configuration,