Using The Lcd Multi-Function Keys - Cisco 7010 Installation Manual

Chapter 6 Using the LCD Panel on a Firepower Device
Pressing a multi-function key as the LCD panel enters Idle Display mode can cause the panel to display
Note
an unexpected menu.

Using the LCD Multi-Function Keys

Four multi-function keys allow you navigate the menus and options on the LCD panel. You can use the
multi-function keys when a key map appears on the display. A symbol's location on the map corresponds
to the function and location of the key used to perform that function. If no symbol is displayed, the
corresponding key has no function.
The function of a symbol, and therefore the key map, varies according the LCD panel mode. If you do
Tip
not get the result you expect, check the mode of the LCD panel.
The following table explains the multi-function key functions.
Table 6-1
Symbol
X
+
-
[Do we want a tip somewhere about returning to the main menu by pressing the left arrow
repeatedly?]
LCD Panel Multi-Function Keys
Description Function
Up arrow Scrolls up the list of current menu options.
Down arrow Scrolls down the list of current menu options.
Left arrow Performs one of the following actions:
Takes no action and displays the LCD panel menu.
•
• Moves the cursor to the left.
• Re-enables editing.
Right arrow Performs one of the following actions:
Enters the menu option displayed on that line.
•
Moves the cursor to the right.
•
Scrolls through continued text.
•
Cancel Cancels the action.
Add Increases the selected digit by one.
Subtract Decreases the selected digit by one.
Check mark Accepts the action.
Using the LCD Multi-Function Keys
Firepower 7000 and 8000 Series Installation Guide
6-3