Cisco 7010 Installation Manual page 144

Firepower 8000 Series Devices
Table 7-54
Parameter
Minimum average launch power
Maximum average power at receiver
Receiver sensitivity
Quad-Port 1000BASE-T Copper Non-Bypass NetMod
The quad-port 1000BASE-T copper non-bypass NetMod contains four copper ports, and link and
activity LEDs.
Use the following table to understand copper LEDs.
Table 7-55
Status
Both LEDs Off
Link Amber
Link Green
Activity Blinking Green
Quad-Port 1000BASE-SX Fiber Non-Bypass NetMod
The quad-port 1000BASE-SX fiber non-bypass NetMod contains four fiber ports, and link and activity
LEDs.
Use the following table to understand the link and activity LEDs on the fiber interfaces.
Firepower 7000 and 8000 Series Installation Guide
7-38
40GBASE-SR4 NetMod Optical Parameters (continued)
Non-Bypass Copper Link/Activity LEDs
Description
The interface does not have link.
The speed of the traffic on the interface is 10Mb or 100Mb.
The speed of the traffic on the interface is 1Gb.
The interface has link and is passing traffic.
Chapter 7
40GBASE-SR4
-7.8 dBm
2.4 dBm
-9.5 dBm
Hardware Specifications