Included Items
Stacking Configuration Considerations
Configure the modules as follows for stacked devices:
•
•
Firepower 82xx Family and 83xx Family
Firepower 82xx Family and 83xx Family devices can use the modules in the following slots:
Figure C-2
Stacking Configuration Considerations
Configure the modules as follows for stacked devices:
•
•
Figure C-3
Included Items
Your module assembly kit includes a T8 Torx screwdriver and one or more of the following modules:
•
•
Firepower 7000 and 8000 Series Installation Guide
C-2
Install NetMods on the primary device only.
Install one stacking module on the primary device and one stacking module on the secondary device.
Firepower 82xx Family and 83xx Family Primary Device
Install NetMods on the primary device only.
Install one stacking module on the primary device for each stacked secondary device, and one
stacking module on each secondary device.
Firepower 82xx Family and 83xx Family Secondary Device
quad-port 1000BASE-T copper configurable bypass NetMod. For more information, see
1000BASE-T Copper Configurable Bypass NetMod, page
quad-port 1000BASE-SX fiber configurable bypass NetMod. For more information, see
1000BASE-SX Fiber Configurable Bypass NetMod, page
Appendix C
Inserting and Removing Firepower 8000 Series Modules
7-33.
7-33.
Quad-Port
Quad-Port