Cisco 7010 Installation Manual page 142

Firepower 8000 Series Devices
Table 7-51 10GBASE MMSR and SMLR NetMod Optical Parameters (continued)
Parameter
Optical interface
Operating distance
Transmitter wavelength
Maximum average launch power
Minimum average launch power
Maximum average power at receiver
Receiver sensitivity
Dual-Port 40GBASE-SR4 Fiber Configurable Bypass NetMod
The dual-port 40GBASE-SR4 fiber configurable bypass NetMod contains two fiber ports and link,
activity, and bypass LEDs.
You can use the 40G NetMod in the following 8000 Series models:
•
•
•
Firepower 7000 and 8000 Series Installation Guide
7-36
10GBASE MMSR
Multimode
840-860 nm
(850 nm typical)
85 ft (26 m) to 108 ft (33 m) for 62.5
µm/125 µm fiber (modal BW 160 to 200
respectively)
216 ft (66 m) to 269 ft (82 m) for 50
µm/125 µm fiber (modal BW 400 to 500
respectively)
Distances to 980 ft (300 m) are available
with higher quality (OM3) fiber.
Minimum distances (all):
6ft (2 m)
840-860 nm
(850 nm typical)
-1 dBm
-7.3 dBm
-1 dBm
-9.9 dBm
Firepower 8270 and 8290
Firepower and AMP 8360, 8370 and 8390
Firepower 8250 and 8260 (must be 40G-capable)
Chapter 7 Hardware Specifications
10GBASE SMLR
Single mode only
1270-1355 nm
(1310 nm typical)
6 ft to 6.2 miles (2 m to 10 km) for
9 µm/125 µm fiber
1270-1355 nm
(1310 nm typical)
-0.5 dBm
-8.2 dBm
-0.5 dBm
-14.4 dBm