Table of Contents
Advertisement
208 PROFIsafe
Configuring the Siemens SIMATIC Fail-safe S7 PLC
This example shows how to configure the communication between the Siemens
SIMATIC Fail-safe S7 PLC and the FENA-21 adapter module using SIMATIC
Manager Step 7 (version V5.5+SP2) and S7 Distributed Safety Programming (version
V5.4+SP5).
For detailed configuration instructions, see the documentation of the safety PLC
(S7 Distributed Safety - configuring and programming, Programming and Operating
Manual, 07/2013, A5E00109537-05).
Before you start, make sure that you have downloaded the FENA GSD file from the
ABB Document library. See section
1. Start SIMATIC Manager and open/create a SIMATIC project.
2. Add the necessary objects to the project.
In this example, a SIMATIC 300 Station and an Industrial Ethernet object have
been added.
3. Open the hardware configuration of the project.
Downloading the GSD file
on page 196.
- Quick Links:
- Fso Module and Safety System Components
Hide quick links:
Advertisement
Table of Contents
