Parameters 321
11
Parameters
Contents of this chapter
This chapter describes the parameters and the status and control words of the FSO
module.
FSO-21 parameters
The following table lists the FSO-21 parameters: The parameter row shows the
parameter index, name, description and factory default value. The subsequent rows
show the parameter value range or names, descriptions and numerical values of the
selectable named alternatives. You can view and modify these parameters in the
Safety settings window of the Drive composer pro PC tool.
Note: The factory default values shown in the table can be different from the pre-set
parameter values in a delivered FSO (ordered with a plus code, eg, +Q972). For
more information, see section
Factory reset
on page 423.
Note: We recommend that you set drive parameter 31.22 STO indication run/stop to
value 3, 4 or 5. This setting prevents the drive from making a fault every time the FSO
opens the drive STO circuit. You can configure the FSO module so that it generates
the necessary faults to the drive event system.
For additional information on parameters and their settings, see the drive firmware
manual.