Adding Ilo Federation Group Memberships (Multiple Ilo Systems) - HP HPE iLO 5 User Manual

6. Click Update Group.
7. If you updated the group name or group key, update them on the other systems in the affected group.
Removing a local iLO system from an iLO Federation group
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click iLO Federation in the navigation tree.
The Setup tab shows the group membership for the local iLO system.
2. Select the check box next to the group membership that you want to delete.
3. Click Delete.
4. When prompted to confirm the request, click OK.

Adding iLO Federation group memberships (multiple iLO systems)

Adding an iLO Federation group based on an existing group
Use this procedure to create an iLO Federation group with the same members as an existing group. For
example, you might want to create a group that contains the same systems that are in the DEFAULT
group, but with different privileges.
Prerequisites
• Configure iLO Settings privilege
• An iLO license that supports this feature is installed.
Procedure
1. Click iLO Federation in the navigation tree, and then click the Group Configuration tab.
If no iLO Federation groups exist, this page displays the following message: There are no
configured groups. Use the iLO Federation Setup page to create a group.
2. Select a group from the Selected Group menu.
All of the systems in the selected group will be added to the group you create on this page.
3. Enter the following information:
• Group Name—The group name, which can be 1 to 31 characters long.
• Group Key—The group password, which can be from the configured minimum password length to
31 characters long.
• Group Key Confirm—Confirm the group password.
If you enter the name of a group that exists, iLO prompts you to enter a unique group name.
4. Select from the following privileges:
Removing a local iLO system from an iLO Federation group 89