Configuring Ilo Access Options - HP HPE iLO 5 User Manual

When this option is disabled, virtual media and scripted virtual media are disabled. The configured
virtual media port is not detected in a security audit that uses a port scanner to scan for security
vulnerabilities.
Virtual Media Port
The port that iLO uses to listen for incoming local Virtual Media connections. The default value is
17988.
SNMP
Specifies whether iLO responds to external SNMP requests.
If you disable SNMP access, iLO continues to operate, and the information displayed in the iLO web
interface is updated. In this state, no alerts are generated and SNMP access is not permitted.
When SNMP access is disabled, most of the boxes on the SNMP Settings page are unavailable and
will not accept input.
SNMP Port
Sets the SNMP port. The industry-standard (default) SNMP port is 161 for SNMP access.
If you customize the SNMP Port value, some SNMP clients might not work correctly with iLO unless
those clients support the use of a nonstandard SNMP port.
SNMP Trap Port
Sets the SNMP trap port. The industry-standard (default) SNMP trap port is 162 for SNMP alerts (or
traps).
If you customize the SNMP Trap Port , some SNMP monitoring applications might not work correctly
with iLO unless those applications support the use of a nonstandard SNMP trap port.
To use SNMP v3 with HPE SIM 7.2 or later, change the SNMP Trap Port value to 50005.
IPMI/DCMI over LAN
Allows you to send industry-standard IPMI and DCMI commands over the LAN.
This setting is disabled by default.
When IPMI/DCMI over LAN is disabled, iLO disables IPMI/DCMI over the LAN. Server-side IPMI/
DCMI applications are still functional when this feature is disabled.
When IPMI/DCMI over LAN is enabled, iLO allows you to use a client-side application to send IPMI/
DCMI commands over the LAN.
When IPMI/DCMI over LAN is disabled, the configured IPMI/DCMI over LAN Port is not detected in
a security audit that uses a port scanner to scan for security vulnerabilities.
IPMI/DCMI over LAN Port
Sets the IPMI/DCMI port number. The default value is 623.

Configuring iLO access options

Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Security in the navigation tree, and then click the Access Settings tab.
2. Update the access options as needed.
228 Configuring iLO access options