Configuring Group Power Capping - HP HPE iLO 5 User Manual

a graceful operating system shutdown before you attempt to shut down by using the Virtual Power
Button.
• Press and Hold—The same as pressing the physical power button for 5 seconds and then releasing
it.
The servers in the selected group are powered off as a result of this operation. Using this option might
circumvent a graceful operating system shutdown.
This option provides the ACPI functionality that some operating systems implement. These operating
systems behave differently, depending on a short press or long press.
• Reset—Forces the servers in the selected group to warm-boot: CPUs and I/O resources are reset.
Using this option circumvents a graceful operating system shutdown.
• Cold Boot—Immediately removes power from the servers in the selected group. Processors, memory,
and I/O resources lose main power. The servers will restart after approximately 6 seconds. Using this
option circumvents a graceful operating system shutdown.
Servers affected by the Virtual Power Button
The Affected Systems list provides the following details about the servers affected when you initiate a
Virtual Power Button action:
• Server Name—The server name defined by the host operating system.
• Server Power—The server power state (ON or OFF).
• UID Indicator—The state of the UID LED. The UID LED helps you identify and locate a server,
especially in high-density rack environments. The possible states are UID ON, UID OFF, and UID
BLINK.
• iLO Hostname—The fully qualified network name assigned to the iLO subsystem. To open the iLO
web interface for the server, click the link in the iLO Hostname column.
• IP Address—The network IP address of the iLO subsystem. To open the iLO web interface for the
server, click the link in the IP Address column.
Click Next or Prev (if available) to view more servers in the list.
More information
Exporting iLO Federation information to a CSV file on page 93

Configuring group power capping

Prerequisites
• An iLO license that supports this feature is installed.
• Each member of the selected iLO Federation group has granted the Configure iLO Settings privilege
to the group.
Procedure
1. Click iLO Federation in the navigation tree, and then click the Group Power Settings tab.
2. Select a group from the Selected Group menu.
100 Servers affected by the Virtual Power Button