HP HPE iLO 5 User Manual page 287

Trap
Trap name
number
6062 cpqHeManagementProcReady
6064 cpqHe5CorrMemReplaceMemModule
6069 cpqHe4FltTolPowerSupplyACpowerloss
6070 cpqHeSysBatteryFailed
6071 cpqHeSysBatteryRemoved
6072 cpqHeSysPwrAllocationNotOptimized
6073 cpqHeSysPwrOnDenied
6074 cpqHePowerFailureError
6075 cpqHeInterlockFailureError
8029 cpqSs6FanStatusChange
8030 cpqSs6TempStatusChange
8031 cpqSs6PwrSupplyStatusChange
8032 cpqSsConnectionStatusChange
9001 cpqSm2ServerReset
9003 cpqSm2UnauthorizedLoginAttempts
9005 cpqSm2SelfTestError
9012 cpqSm2SecurityOverrideEngaged
Description
The management processor is ready.
Memory errors have been corrected.
Replace the memory module.
The fault-tolerant power supply in the
specified chassis and bay reported AC
power loss.
The HPE Smart Storage Battery has
failed.
The HPE Smart Storage Battery has
been removed.
iLO could not determine the power
requirements. The server power
allocation is not optimized.
The server could not power on
because the hardware cannot be
identified.
A device power failure has been
detected.
A device is missing or improperly
seated on the system board.
The storage enclosure fan status
changed.
The storage enclosure temperature
status changed.
The storage enclosure power status
changed.
The storage enclosure status changed.
The server power has been reset.
The maximum unauthorized login
attempt threshold has been exceeded.
iLO 5 detected a self test error.
iLO 5 detected that the security
override jumper has been toggled to
the engaged position.
Configuring iLO management settings
Table Continued
287