Installing A Component From The Ilo Repository - HP HPE iLO 5 User Manual

If the Upload to iLO Repository option is not displayed, click the ellipsis icon in the top right corner of
the iLO web interface, then click Upload to iLO Repository.
2. Select the Local file or Remote file option.
3. Depending on the option you selected, do one of the following:
• In the Local binary file box, click Browse (Internet Explorer or Firefox) or Choose Files (Chrome),
and then specify the location of the firmware component.
• In the Remote binary file URL box, enter the URL for a firmware component on an accessible web
server.
4. For firmware components specified by multiple files only: Select the I have a component signature
file check box.
5. If you selected the check box in the previous step, do one of the following:
• In the Local component signature file box, click Browse (Internet Explorer or Firefox) or Choose
Files (Chrome), and then specify the location of the component signature file.
• In the Remote component signature file URL box, enter the URL for a component signature file
on an accessible web server.
6. Click Upload.
iLO notifies you that uploading a component with the same name as an existing component will
replace the existing component. Components that are part of the Recovery Set are protected and
cannot be replaced by uploading a new component with the same name. To replace a Recovery Set
component, log in with an account that has the Recovery Set privilege, and then delete the recovery
install set.
7. Click OK.
The upload starts. The upload status is displayed at the top of the iLO web interface.

Installing a component from the iLO Repository

You can add a component to the installation queue from the iLO Repository page.
When you add a component to the installation queue, it is added to the end of the queue. After other
queued items are complete, the added component is installed when the software that initiates updates for
the component type detects the installation request. To determine the software that can initiate an update,
check the component details on the iLO Repository and Installation Queue pages.
If a component in a previously queued task is waiting to start or finish, a new queued component might be
delayed indefinitely. For example, if a queued update must wait until the UEFI BIOS detects it during
server POST, but the server is not restarted, then the updates that follow in the queue will not be installed.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click iLO Repository.
2. Click the install component icon next to the component you want to install.
Installing a component from the iLO Repository 75