HP HPE iLO 5 User Manual page 26

Editing user accounts (iLO 5 Configuration Utility)
Procedure
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. Click System Configuration, click iLO 5 Configuration Utility, click User Management, and then
click Edit/Remove User.
5. In the Action menu for the user you want to edit or remove, select Edit.
The account properties are displayed.
6. Update the Login Name.
7. Update the Password.
a. Move the cursor to the Password box, and then press Enter.
The Enter your new password box opens.
b. Type the password, and then press Enter.
The Confirm your new password box opens.
c. Type the password again to confirm, and then press Enter.
8. Modify the user account privileges.
To assign a privilege, select YES in the menu next to the privilege name. To remove a privilege,
select NO.
The Login privilege is assigned to every user by default, so it is not available in the iLO 5
Configuration Utility.
You cannot assign the Recovery Set privilege through the iLO 5 Configuration Utility, so it is not
available in the list.
9. Update as many user accounts as needed, and then press F12 to save the changes and exit the
system utilities.
10. When prompted to confirm the changes, click Yes - Save Changes to exit the utility and resume the
boot process.
More information
iLO user privileges on page 204
iLO user account options on page 204
Removing user accounts (iLO 5 Configuration Utility)
Procedure
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
26 Editing user accounts (iLO 5 Configuration Utility)