Toggling The Server Uid Led; Viewing Chassis Information; Power Supplies List - HP HPE iLO 5 User Manual

Toggling the server UID LED

Procedure
To change the state of the server UID LED, click the server UID icon

Viewing chassis information

Procedure
Click Chassis Information in the navigation tree.

Power Supplies list

The Chassis Information page displays the following details about the power supplies in the chassis.
Some power supplies do not provide information for all the values on this page. If a power supply does
not provide information for a value, N/A is displayed.
Bay
The chassis power supply bay number.
Present
Indicates whether a power supply is installed. The possible values are OK and Not Installed.
Status
The status of the power supply. The displayed value includes a status icon (OK, Degraded, Failed, or
Other), and text that provides more information. The possible values follow:
• Unknown
• Good, In Use
• Good, Standby
• General Failure
• Over Voltage Failure
• Over Current Failure
• Over Temperature Failure
• Input Voltage Lost
• Fan Failure
• High Input A/C Warning
• Low Input A/C Warning
• High Output Warning
• Low Output Warning
• Inlet Temperature Warning
• Internal Temperature Warning
296 Toggling the server UID LED
in the frame diagram.