Configuring Ipv6 Settings - HP HPE iLO 5 User Manual

DNS Configuration settings
Primary DNS Server
If Use DHCPv4 Supplied DNS Servers is enabled, this value is supplied automatically. If not, enter
the Primary DNS Server address.
Secondary DNS Server
If Use DHCPv4 Supplied DNS Servers is enabled, this value is supplied automatically. If not, enter
the Secondary DNS Server address.
Tertiary DNS Server
If Use DHCPv4 Supplied DNS Servers is enabled, this value is supplied automatically. If not, enter
the Tertiary DNS Server address.
Enable DDNS Server Registration
Enable or disable this option to specify whether iLO registers its IPv4 address and name with a DNS
server.
WINS Configuration settings
Primary WINS Server
If Use DHCPv4 Supplied WINS Servers is enabled, this value is supplied automatically. If not, enter
the Primary WINS Server address.
Secondary WINS Server
If Use DHCPv4 Supplied WINS Servers is enabled, this value is supplied automatically. If not, enter
the Secondary WINS Server address.
Enable WINS Server Registration
Enable or disable this option to specify whether iLO registers its name with a WINS server.
Static Route Configuration settings
Static Route #1 Setting, Static Route #2 Setting, and Static Route #3 Setting
The iLO static route destination, mask, and gateway addresses. If Use DHCPv4 Supplied Static
Routes is enabled, these values are supplied automatically. If not, enter the static route values.
Other settings
Ping Gateway on Startup
Enable this option to configure iLO to send four ICMP echo request packets to the gateway when the
iLO processor initializes. This activity ensures that the ARP cache entry for iLO is up-to-date on the
router responsible for routing packets to and from iLO.

Configuring IPv6 settings

Use the iLO Dedicated Network Port IPv6 Settings page to configure the iLO IPv6 settings. IPv6 is not
supported in the Shared Network Port configuration.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click iLO Dedicated Network Port in the navigation tree, and then click the IPv6 tab.
2. Configure the Global IPv6 Configuration settings.
Configuring IPv6 settings 173