Systems Without An Ilo Management Processor - HP Integrity rx2620 User's & Service Manual

4. Select a, and a threshold filter number to filter events to the desired level.
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to
Quit) >a
Alert Level Threshold Filter:
1 : Major Forward Progress
2 : Informational
3 : Warning
5 : Critical
7 : Fatal
Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
5. Select t to change the display to text mode:
Display Mode Configuration:
Current -> K - Keyword mode
Enter new value, or [Q] to Quit:
6. To decode the flashing state of server LED, review the entire SEL and look at
events with alert level 3 and above.
For example:
Log Entry 24: 14 Feb 2003 15:27:02
Alert Level 3: Warning
Keyword: Type-02 1b0800 1771520
Hot Swap Cage: SCSI cable removed
Logged by: BMC;
Data1: Device Removed/Device Absent
0x203E4D0AC6020220 FFFF0008F61B0300
Log Entry 73: 00:00:12
Alert Level 3: Warning
Keyword: Type-02 050301 328449
The server's built-in sensors have detected an open chassis door.
Logged by: BMC;
Data1: State Asserted
0x200000000C020570 FFFF010302050300
NOTE:
(page 134).

Systems Without an iLO Management Processor

The server LED states operate the same as servers that have the optional iLO MP.
See Table 20.
Table 20 Power and System LED States
Power LED
Off (flashing green)
On (green)
On (green)
On (green)
On (green)
H - Hex mode
T - Text mode
Sensor: Cable / Interconnect - SCSI ChExt Cable
Sensor: Physical Security - Chassis Open
More detailed information on the server logs is presented in
System LED
Off
Solid green
Flashing green
Flashing yellow (1/sec.)
Flashing red (2/sec.)
State
Server is off
Running
Booting or running code other than operating system
(boot or diagnostic)
Attention indication
Fault indication
Appendix C
91