Table of Contents
Advertisement
HPLOMIG management processor search criteria
You can search for management processors by using DNS names, IP addresses, or IP address
wildcards.
The following rules apply when you enter values in the Addresses box:
•
DNS names, IP addresses, and IP address wildcards must be delimited either with semicolons or
commas, not both.
•
The IP address wildcard uses the asterisk (*) character in the third and fourth octet fields. For
example, IP address 16.100.*.* is valid, and IP address 16.*.*.* is invalid.
•
Ranges can be specified by using a hyphen. For example, 192.168.0.2-10 is a valid range. A
hyphen is supported only in the rightmost octet.
•
After you click Find, HPLOMIG begins pinging and connecting to port 443 (the default SSL port) to
determine whether the target network address is a management processor. If the device does not
respond to the ping or connect appropriately on port 443, the utility determines that it is not a
management processor.
HPLOMIG management processor import list requirements
You can import a simple text file with one management processor listed on each line.
The supported columns, which are delimited with semicolons, follow:
•
Network Address
•
Product
•
F/W Version
•
DNS Name
336
HPLOMIG management processor search criteria
Advertisement
Table of Contents
Troubleshooting
