Optional: Upgrading Firmware On Management Processors (Hplomig) - HP HPE iLO 5 User Manual

• TPM Status
• User Name
• Password
• LDAP Status
• Kerberos Status
• License Type
• FIPS Status
For example, one line in the text file might have the following information:
16.100.225.20;iLO;1.10;ILOTPILOT2210;Not Present;user;password;Default
Schema;Kerberos Disabled;iLO Advanced;Enabled
If, for security reasons, the user name and password cannot be included in the file, leave these columns
blank, but enter the semicolons.

Optional: Upgrading firmware on management processors (HPLOMIG)

After you click Next in the Find Management Processors window, the next task is to update the iLO
firmware, if needed. The upgrade process might take a long time, depending on the number of selected
management processors. The firmware upgrade of a single management processor might take up to 5
minutes to complete.
IMPORTANT:
Hewlett Packard Enterprise recommends that you test the upgrade process and verify the results in
a test environment before running HPLOMIG on a production network. An incomplete transfer of the
firmware image to a management processor might result in the need to reprogram the management
processor locally.
Prerequisites
Binary images of the firmware for the management processors must be accessible from the system that is
running HPLOMIG. These binary images can be downloaded from http://www.hpe.com/support/ilo5.
Procedure
1. Navigate to the Upgrade Firmware on Management Processors window if it is not already open.
Optional: Upgrading firmware on management processors (HPLOMIG) 337