Configuring Ilo Sntp Settings - HP HPE iLO 5 User Manual

• IPv6 Static Address Assignment
• IPv6 SLAAC Address Assignment
• IPv6 Static Route Assignment
• IPv6 Static Default Gateway Entry
• DHCPv6 Stateful Address Assignment
• DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
• Integrated Remote Console
• Onboard Administrator Single Sign-On
• HPE Single Sign-On
• Web Server
• SSH Server
• SNTP Client
• DDNS Client
• RIBCL over IPv6
• SNMP
• AlertMail
• Remote Syslog
• WinDBG Support
• HPQLOCFG/HPLOMIG over an IPv6 connection
• Scriptable Virtual Media
• CLI/RIBCL key import over an IPv6 connection
• Authentication using LDAP and Kerberos over IPv6
• iLO Federation
• IPMI

Configuring iLO SNTP settings

Prerequisites
• Configure iLO Settings privilege
• At least one NTP server is available on your management network.
• If you will use a DHCPv4-provided NTP service configuration, DHCPv4 is enabled on the IPv4 tab.
• If you will use a DHCPv6-provided NTP service configuration, DHCPv6 Stateless Mode is enabled on
the IPv6 tab.
• For DHCPv6 time settings configurations only: The server is configured to use the iLO Dedicated
Network Port. IPv6 is not supported in the Shared Network Port configuration.
176 Configuring iLO SNTP settings