Configuring Encryption Settings; Enabling The Production Or Highsecurity Security State - HP HPE iLO 5 User Manual

If the test is successful, the directory server accepted the binding.
Directory Administrator Login
If Directory Administrator Distinguished Name and Directory Administrator Password were
specified, iLO uses these values to log in to the directory server as an administrator. Providing these
values is optional.
User Authentication
iLO authenticates to the directory server with the specified user name and password.
If the test is successful, the supplied user credentials are correct.
If the test fails, the user name and/or password is incorrect.
User Authorization
This test verifies that the specified user name is part of the specified directory group, and is part of the
directory search context specified during directory services configuration.
Directory User Contexts
If Directory Administrator Distinguished Name was specified, iLO tries to search the specified
context.
If the test is successful, iLO found the context by using the administrator credentials to search for the
container in the directory.
User login is the only way that you can test contexts that begin with the @ symbol.
A failure indicates that the container could not be located.
LOM Object Exists
This test searches for the iLO object in the directory server by using the LOM Object Distinguished
Name configured on the Security - Directory page.
If the test is successful, iLO found the object that represents itself.

Configuring encryption settings

Enabling the Production or HighSecurity security state

Use this procedure to configure iLO to use one of the following security states: Production or
HighSecurity.
To configure iLO to use the FIPS and SuiteB security states, see Enabling the FIPS and SuiteB
security states.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Optional: Install any needed firmware and software updates.
2. Click Security in the navigation tree, and then click the Encryption tab.
3. Select Production or HighSecurity in the Security State menu.
4. To end your browser connection and restart iLO, click Apply.
Configuring encryption settings 257