Table of Contents
Advertisement
The session leader receives your request to join the .NET IRC session.
If the session leader clicks Yes, you are granted access to the .NET IRC session with access to the
keyboard and mouse.
Console Capture (.NET IRC only)
Console Capture allows you to record and play back video streams of events such as startup, ASR
events, and sensed operating system faults. iLO automatically captures the Server Startup and Server
Prefailure sequences. You can manually start and stop the recording of console video.
•
Console Capture is supported with the .NET IRC; it is not supported with the Java IRC.
•
Console Capture is available only through the .NET IRC. It cannot be accessed through XML scripting
or the CLP.
•
The Server Startup and Server Prefailure sequences are not captured automatically during firmware
updates or while the Remote Console is in use.
•
Server Startup and Server Prefailure sequences are saved automatically in iLO memory. They will be
lost during firmware updates, iLO reset, and power loss. You can save the captured video to your local
drive by using the .NET IRC.
•
The Server Startup file starts capturing when server startup is detected, and stops when it runs out of
space. This file is overwritten each time the server starts.
•
The Server Prefailure file starts capturing when the Server Startup file is full, and stops when iLO
detects an ASR event. The Server Prefailure file is locked when iLO detects an ASR event. The file is
unlocked and can be overwritten after it is downloaded through the .NET IRC.
•
The Console Capture control buttons are on the bottom of the .NET IRC session window.
The following controls are available:
◦
Skip to Start—Restarts playback from the beginning of the file.
◦
Pause—Pauses the playback.
◦
Play—Starts playback if the currently selected file is not playing or is paused.
◦
Record—Records your .NET IRC session.
◦
Progress Bar—Shows the progress of the video session.
Move the cursor over the controls to identify each button.
Viewing Server Startup and Server Prefailure sequences
Prerequisites
•
Remote Console privilege
•
The Remote Console feature is enabled on the Access Settings page.
•
An iLO license that supports this feature is installed.
114
Console Capture (.NET IRC only)
Advertisement
Table of Contents
Troubleshooting
