Viewing Connected Scripted Media; Ejecting Scripted Media; Remote Console Virtual Media - HP HPE iLO 5 User Manual

Viewing connected scripted media

Prerequisites
• Virtual Media privilege
• The Virtual Media feature is enabled on the Access Settings page.
Procedure
Click Remote Console & Media in the navigation tree, and then click the Virtual Media tab.
Scripted media details
When scripted Virtual Media is connected, the details are listed in the Virtual Floppy/Virtual Folder
Status or Virtual CD/DVD-ROM Status section:
• Media Inserted—The Virtual Media type that is connected.
Scripted Media is displayed when scripted media is connected.
• Connected—Indicates whether a Virtual Media device is connected.
• Image URL—The URL that points to the connected scripted media.

Ejecting scripted media

Prerequisites
• Virtual Media privilege
• The Virtual Media feature is enabled on the Access Settings page.
Procedure
1. Click Remote Console & Media in the navigation tree, and then click Virtual Media.
2. To eject scripted media devices, click the Force Eject Media button in the Virtual Floppy/Virtual
Folder Status or Virtual CD/DVD-ROM Status section.
For server blades without an iLO license that grants full Virtual Media privileges, you cannot use the
Force Eject Media option with a virtual media image that was mounted through a URL. In this case,
the connection is most likely the Onboard Administrator DVD Drive. This connection must be
disconnected through the Onboard Administrator software. An iLO reset will also close the connection.

Remote Console Virtual Media

You can access Virtual Media on a host server by using the Remote Console, the iLO web interface, XML
configuration and control scripts, the iLO RESTful API, and the CLP. This section describes how to use
the Virtual Media feature with the .NET IRC or Java IRC.
136 Viewing connected scripted media