Directory Server Dns Name Test Reports A Failure; Ping Directory Server Test Reports A Failure; Connect To Directory Server Test Reports A Failure - HP HPE iLO 5 User Manual

Table of Contents

Advertisement

5. Select the Personal > Certificates folder.
6. Right-click the folder and select Request New Certificate.
7. Verify that the Type is domain controller, and click Next until a certificate is issued.

Directory Server DNS Name test reports a failure

Symptom
The Directory Server DNS Name test reports the status Failed.
Cause
iLO cannot obtain an IP address for the directory server.
Action
Verify that the DNS server configured in iLO is correct.
Verify that the directory server FQDN is correct.
As a troubleshooting tool, use an IP address instead of the FQDN.
If the problem persists, check the DNS server records and network routing.

Ping Directory Server test reports a failure

Symptom
The Ping Directory Server test reports the status Failed.
Cause
iLO pinged the directory server and did not receive a response.
Action
Check to see if a firewall is active on the directory server.
Check for network routing issues.

Connect to Directory Server test reports a failure

Symptom
The Connect to Directory Server test reports the status Failed.
Cause
iLO failed to initiate an LDAP connection with the specified directory server.
378
Directory Server DNS Name test reports a failure

Advertisement

Table of Contents
loading

Table of Contents