Table of Contents
Advertisement
3. Verify that Secure Shell (SSH) Access is enabled on the Access Settings page.
4. Use Putty.exe to open an SSH session using port 22.
5. Change to the cd /Map1/Config1 directory.
6. Enter the following command:
load sshkey type "oemhpe_loadSSHkey -source <protocol://username:password@hostname:port/filename>"
When you use this command:
•
The protocol value is required and must be HTTP or HTTPS.
•
The hostname and filename values are required.
•
The username:password and port values are optional.
•
oemhpe_loadSSHkey is case-sensitive.
The CLI performs a cursory syntax verification of the values you enter. Visually verify that the URL is
valid. The following example shows the command structure:
oemhpe_loadSSHkey -source http://192.168.1.1/images/path/sshkey.pub
Deleting SSH keys
Use the following procedure to delete SSH keys from one or more user accounts.
When an SSH key is deleted from iLO, an SSH client cannot authenticate to iLO by using the
corresponding private key.
Prerequisites
Administer User Accounts privilege
Procedure
1. Click Security in the navigation tree, and then click the Secure Shell Key tab.
2. In the Authorized SSH Keys list, select the check box to the left of one or more user accounts.
3. Click Delete Selected Key(s).
The selected SSH keys are removed from iLO.
Requirements for authorizing SSH keys from an HPE SIM server
The mxagentconfig utility enables you to authorize SSH keys from an HPE SIM server.
•
SSH must be enabled on iLO before you use mxagentconfig to authorize a key.
•
The user name and password entered in mxagentconfig must correspond to an iLO user who has
the Configure iLO Settings privilege. The user can be a directory user or a local user.
•
The key is authorized on iLO and corresponds to the user name specified in the mxagentconfig
command.
For more information about mxagentconfig, see the iLO scripting and CLI guide.
Deleting SSH keys
239
Advertisement
Table of Contents
Troubleshooting
