HP HPE iLO 5 User Manual page 231

XML Reply
Controls the XML object iLO provides in response to an anonymous request for basic system
information. When this setting is enabled (default), other software is allowed to discover and identify
an iLO system on the network. To view the XML response that iLO provides, click View.
When this option is disabled, iLO responds to requests with an empty XML object.
Serial Command Line Interface Status
Enables you to change the login model of the CLI feature through the serial port. The following
settings are valid:
• Enabled-Authentication Required (default)—Enables access to the SMASH CLP command line
from a terminal connected to the host serial port. Valid iLO user credentials are required.
• Enabled-No Authentication—Enables access to the SMASH CLP command line from a terminal
connected to the host serial port. iLO user credentials are not required.
• Disabled—Disables access to the SMASH CLP command line from the host serial port. Use this
option if you are planning to use physical serial devices.
Serial Command Line Interface Speed
Enables you to change the speed of the serial port for the CLI feature.
The following speeds (in bits per second) are valid:
• 9600 (default)
For Synergy compute modules only: Ensure that this value is set to 9600. If you use another value,
you cannot access the Serial Command Line Interface from the Synergy Console and Composer
CLI.
• 19200
• 38400—The iLO configuration options in the UEFI System Utilities do not support this value.
• 57600
• 115200
The serial port configuration must be set to no parity, eight data bits, and one stop bit (N/8/1) for
correct operation.
Set this value to match the serial port speed configured in the UEFI System Utilities.
Minimum Password Length
Specifies the minimum number of characters allowed when a user password is set or changed. The
character length must be a value from 0 to 39 characters long. The default value is 8.
Server Name
Enables you to specify the host server name. You can assign this value manually, but it might be
overwritten by the host software when the operating system loads.
• You can enter a server name that is up to 49 bytes.
• To force the browser to refresh and display the new value, save this setting, and then press F5.
Using the iLO security features 231