Table of Contents
Advertisement
•
Firmware Version—The installed device firmware version.
•
Status—The device status.
Device status values
The Device Inventory page uses the following status values:
•
OK—The device is working correctly.
•
Other—The device status could not be determined.
•
No Supporting CPU—The CPU that supports the device slot is not installed.
•
Not Installed—A device is not installed.
•
Link Down—The network link is down.
•
Failed—One or more components of the device are nonoperational.
•
Degraded—The device is operating at a reduced capacity.
•
Warning—The device is operating at a reduced capacity.
•
Unknown—The iLO firmware has not received data about the device status.
Viewing PCI slot details
Procedure
1. Click System Information in the navigation tree, and then click the Device Inventory tab.
2. Move the cursor over the Location column for a listed PCI slot.
PCI slot tooltip details
•
Type—The PCI slot type.
•
Bus Width—The PCI slot bus width.
•
Length—The PCI slot length.
•
Characteristics 1—Information about the PCI slot, for example, voltage and other support
information.
•
Characteristics 2—Information about the PCI slot, for example, voltage and other support
information.
Viewing storage information
If the server is powered off, the system health information on this page is current as of the last power off.
Health information is updated only when the server is powered on and POST is complete.
To view a full set of data on this page, ensure that AMS is installed and running. SAS/SATA controller
information is displayed only if AMS is installed and running on the server.
Device status values
63
Advertisement
Table of Contents
Troubleshooting
