HP HPE iLO 5 User Manual page 286

Trap
Trap name
number
6034 cpqHe3FltTolPowerSupplyRemoved
6035 cpqHe3FltTolFanDegraded
6036 cpqHe3FltTolFanFailed
6037 cpqHe3FltTolFanRedundancyLost
6038 cpqHe3FltTolFanInserted
6039 cpqHe3FltTolFanRemoved
6040 cpqHe3TemperatureFailed
6041 cpqHe3TemperatureDegraded
6042 cpqHe3TemperatureOk
6048 cpqHe4FltTolPowerSupplyOk
6049 cpqHe4FltTolPowerSupplyDegraded
6050 cpqHe4FltTolPowerSupplyFailed
6051 cpqHeResilientMemMirroredMemoryEngaged
6054 cpqHe3FltTolPowerRedundancyRestore
6055 cpqHe3FltTolFanRedundancyRestored
6061 cpqHeManagementProcInReset
286 Configuring iLO management settings
Description
A fault-tolerant power supply has been
removed.
The fault-tolerant fan condition has
been set to Degraded.
The fault-tolerant fan condition has
been set to Failed.
The fault-tolerant fans have lost
redundancy.
A fault-tolerant fan has been inserted.
A fault-tolerant fan has been removed.
Temperature exceeded on the server.
The temperature status has been set to
Degraded, and the temperature is
outside the normal operating range.
Depending on the system
configuration, this system might be
shut down.
The temperature status has been set to
OK.
The fault-tolerant power supply
condition has been reset to OK.
The fault-tolerant power supply
condition has been set to Degraded.
The fault-tolerant power supply
condition has been set to Failed.
The Advanced Memory Protection
subsystem has detected a memory
fault. Mirrored Memory has been
activated.
The fault-tolerant power supplies have
returned to a redundant state.
The fault-tolerant fans have returned to
a redundant state.
The management processor is
resetting.
Table Continued