7.6.2 Running ECU
The EISA Configuration Utility (ECU) is used to configure EISA options on
AlphaServer systems. At the SRM console prompt, enter alphabios to bring up
the AlphaBIOS console (you must run ECU in AlphaBIOS console mode).
Example 7–5 shows the AlphaBIOS Setup display when run from a serial
terminal.
Example 7–5 Running ECU
AlphaBIOS Setup
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS...
Insert the floppy containing EISA Configuration Utility
(ECU) and press ENTER to run it.
ESC=Exit
7-18
Configuration and Installation Guide
F1=Help
Run ECU from floppy...
OS Selection Setup...
Run Maintenance Program...
PK-0720B-96