Table of Contents
Advertisement
WARNING: At least two people are required to remove the cabinet from the pallet.
WARNING: Serious injury may result if the cabinet is improperly handled or proper
safety conditions are not met.
1. Check the cabinet sides, top, and front and rear doors for damage. Report any
damage to the cabinet to the customer and your unit manager. Stop unpacking
until the customer gives you permission to continue.
2. Using an adjustable wrench, remove the four bolts and shipping brackets that
hold the cabinet leveler feet to the pallet.
3. The leveler feet are lowered to the pallet surface for shipment. Using the
adjustable wrench, raise the feet to the uppermost position before removing the
cabinet from the pallet (see Figure 2–5).
4. Attach the ramps by fitting the prongs into the holes on the front of the pallet.
Place the ramps so that the runners are on the inside. Align the arrows on the
ramps and pallet.
5. With two people working together (one in front and one in back) slowly roll the
cabinet off the pallet down the ramps. Move the cabinet into position.
Preparing the Cabinet
2-7
Advertisement
Table of Contents
