1. In the H910A cabinet, install the StorageWorks shelf mounting rails as shown in
Figure 4–10.
2. Attach the U-nuts to the appropriate mounting holes.
3. Attach the mounting rail using two screws inserted into the two U-nut mounting
holes.
4. Attach the front holding bracket and the two additional screws.
5. Attach the other holding bracket.
6. Install the StorageWorks shelf by sliding it onto the mounting rails.
7. Connect the shelf power cable to an AC power strip. Connect the shelf signal
cable to the SCSI controller in the PCI card cage.
Figure 4–10 Installing Shelf Mounting Rails in H910A Cabinet
Front
PK-0635-96
Installing Components in Cabinet
4-17