Digital Equipment AlphaServer 4000 Configuration And Installation Manual page 105

Example 7–3 Show Power
P00>>> show power
Status
Power Supply 0 good
Power Supply 1 not present
Power Supply 2 good
System Fans good
CPU Fans good
Temperature good
The system was last reset via a system software reset
0 Environmental events are logged in nvram
P00>>>
Use the show configuration command to see a listing of the modules in the
system. This command shows the module motherboard or PCI slot number,
module name, module type, revision, mnemonic, and the self-test status of PCI
and EISA modules. In this example, all PCI and EISA modules passed (+) self-
test.
The show power command displays status information on the power supplies,
system fans, CPU fans, and system temperature.
For more information on the show commands, see the System Drawer User's Guide.
System Power-Up and Verification 7-15