Running The Diagnostics; Running Quick Tests Or Groups Of Tests - Digital Equipment 3100R Series Service Maintenance Manual

Troubleshooting

Running the Diagnostics

To run the AMIDiag base package (Emergency Mode diskette) from a diskette, follow
this procedure:
1. Insert the diskette labeled "For Emergency Use" in drive A and then boot the
server.
2. Use the arrow keys to highlight the desired test.
3. Press [Enter].
For additional troubleshooting information refer to the AMIDiag User's Guide,
located under "Additional Documentation" on the Quick Launch CD-ROM.

Running Quick Tests or Groups of Tests

Function keys can be used to select and run groups of tests. A list of function keys is
available by pressing the F9 key. The following list includes examples of how to run
Quick Tests or Groups of Tests.
•
To run Quick Test, press F8 to select tests, then F10 to run all the selected
tests.
•
To run all Memory tests, press F6 to select tests listed on the menu, then
press F10 to run all the selected tests.
•
To run all tests from all menus, press F7 to select all tests, then press F10 to
run all the selected tests.
4-4