Check Power-Up Test Results - Digital Equipment AlphaServer 4000 Configuration And Installation Manual

7.3 Check Power-Up Test Results

After powering up the system, testing begins and status messages display on the
console terminal and on the control panel display. Check the test results on the
console terminal. Example 7–1 shows a sample display of test results.
Example 7–1 Test Results
SROM V2.0 on cpu0
SROM V2.0 on cpu1
XSROM V2.0 on cpu1
XSROM V2.0 on cpu0
BCache testing complete on cpu1
BCache testing complete on cpu0
mem_pair0 - 128 MB
mem_pair1 - 128 MB
20..20..21..21..23..24..24..
Memory testing complete on cpu1
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
0 128 MB SYNC
1 128 MB SYNC
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - DEC KZPSA
bus 0 slot 3 - NCR 53C810
bus 0 slot 4 - DECchip 21040-AA
bus 0 slot 5 - DEC PCI MC
probing IOD0 hose 0
bus 0 slot 1 - PCEB
bus 0 slot 4 - DEC PCI FDDI
bus 0 slot 5 - PBXGA-AA
configuring I/O adapters...
ncr0, hose 1, slot 1, bus 0
kzpsa0, hose 1, slot 2, bus 0
ncr1, hose 1, slot 3, bus 0
tulip0, hose 1, slot 4, bus 0
floppy0, hose 0, slot 0, bus 1
pfi0, hose 0, slot 4, bus 0
7-6 Configuration and Installation Guide
#This section displays
#on serial terminals
#only.
#This section displays
#on both serial and
#graphics terminals.