Table of Contents
Advertisement
1. Unpack the graphics monitor, if required. Locate the signal cable.
2. Connect one end of the cable to the VGA port in the PCI card cage. Connect the
other end of the cable to the graphics monitor, which connects to a 25-pin
connector.
3. Connect the keyboard cable to the keyboard port at the rear of the system
drawer.
4. Connect the mouse cable to the mouse port.
5. During power-up, you may want to capture the power-up display on a serial
printer. To do this, connect a serial printer to the parallel port.
Making Connections
6-5
Advertisement
Table of Contents
