1. Unpack the serial terminal, if required. Locate the console terminal signal
cable.
2. Connect one end of the cable to the COM1 port located at the rear of the system
drawer (see Figure 6–2). Connect the other end of the cable to the console
terminal, which connects to a 25-pin connector.
3. Connect the keyboard cable to the keyboard port at the rear of the serial
terminal.
4. Connect the printer cable to the parallel port.
Figure 6–2 COM1, Serial Terminal Port
Parallel
Keyboard
COM1
Port
Port
Port
PK-0624A-96
Making Connections
6-3